Trout About
Pro Angler
- Total Posts : 1048
- Reward points: 0
- Joined: 2001/11/24 21:32:27
- Location: West Newton, PA
- Status: offline
St. Croix float blanks.
The new Avid CP blanks are now available. They are also offered in a finished rod. CP110LM2 11’ 0†2 Piece – Light power, Moderate action. Blank weight is 2.6 ounces Blank price is $140 3CP130MLM2 13' 0" 2 piece - Medium-light power, Moderate action. Blank weight 3.5 ounces Blank price $150 3CP150MLM3 15' 0" 3 piece - Medium-light power, Moderate action. Blank weight 4.3 ounces Blank price $170 They seem pretty light for such a long blank. Gonna be building a 15' in the spring!
|
papinner
Pro Angler
- Total Posts : 1083
- Reward points: 0
- Joined: 2008/11/20 17:56:41
- Location: north east
- Status: offline
RE: St. Croix float blanks.
2009/11/25 08:26:28
(permalink)
Its about time I've been waiting to see these rods.
|
Loomis
Pro Angler
- Total Posts : 2674
- Reward points: 0
- Joined: 2005/09/19 09:18:47
- Status: offline
RE: St. Croix float blanks.
2009/11/25 09:37:53
(permalink)
Nice, gonna have to spin one of these badboys up.
|
Trout About
Pro Angler
- Total Posts : 1048
- Reward points: 0
- Joined: 2001/11/24 21:32:27
- Location: West Newton, PA
- Status: offline
RE: St. Croix float blanks.
2010/02/22 21:38:32
(permalink)
Picked up my 15' St. Croix blank at High Point this weekend. Now, gotta sell some stuff so I can get the guides.
|
HCsteel
Expert Angler
- Total Posts : 732
- Reward points: 0
- Joined: 2009/07/31 20:08:17
- Location: Harborcreek
- Status: offline
RE: St. Croix float blanks.
2010/02/23 12:40:02
(permalink)
Loomis do you tie up alot of pinning rods? I may have to hit you up with some ideas and see about pricing. I want to have a light trout pinning rod made up.
|
mxdad66
Expert Angler
- Total Posts : 751
- Reward points: 0
- Joined: 2006/10/04 21:52:04
- Status: offline
RE: St. Croix float blanks.
2010/02/23 19:45:49
(permalink)
Not to rob the post,but if anyone is interested in a brand new Loomis 13', 2 piece,$ 450,pm me and I will put you in touch with the guy.
|
Carphead
Expert Angler
- Total Posts : 284
- Reward points: 0
- Joined: 2008/03/17 20:58:36
- Status: offline
RE: St. Croix float blanks.
2010/02/23 20:43:41
(permalink)
Got my St. Croix 15' ready to go, matched up with a Paine Falls. I'm going to try to get it out on the Ohio, before the water gets too high. Fishing will be slow, but it will be good for keeping up with the casting.
".......because flyfishermen are the highest ranking authority on the creeks."----Swinger 9/15/2009
|
sudsy1000
Avid Angler
- Total Posts : 114
- Reward points: 0
- Joined: 2007/05/03 07:11:19
- Status: offline
RE: St. Croix float blanks.
2010/02/23 22:06:34
(permalink)
HCSteel I believe I've seen Trout About post some pics of his rods on various forums. I would give him a shot also. His work is top notch.
|
mxdad66
Expert Angler
- Total Posts : 751
- Reward points: 0
- Joined: 2006/10/04 21:52:04
- Status: offline
RE: St. Croix float blanks.
2010/02/24 17:53:25
(permalink)
|
Trout About
Pro Angler
- Total Posts : 1048
- Reward points: 0
- Joined: 2001/11/24 21:32:27
- Location: West Newton, PA
- Status: offline
RE: St. Croix float blanks.
2010/02/25 07:35:48
(permalink)
ORIGINAL: mxdad66 Why a 15'? Cause I have a 13' and I want more . Float rods are like boats......you always want another 2'. There's a few spots on the Yough that I fish and I'm reaching the limits of the 13'. The 15' should give me the extra length for the drift I want.
|
Loomis
Pro Angler
- Total Posts : 2674
- Reward points: 0
- Joined: 2005/09/19 09:18:47
- Status: offline
RE: St. Croix float blanks.
2010/02/25 11:51:59
(permalink)
TroutAbout, did u you build any float rods on CTS Blanks out of NZ? Was thinking of trying one for the heck of it.....
|
Trout About
Pro Angler
- Total Posts : 1048
- Reward points: 0
- Joined: 2001/11/24 21:32:27
- Location: West Newton, PA
- Status: offline
RE: St. Croix float blanks.
2010/02/25 13:41:00
(permalink)
I wanted to build one on the blank that John Collina designed and had CTS build, but didn't want to spend $360 for a blank that I couldn't wiggle first. Tried to get set up wholesale with him, but he has a $1000 min. first order and I couldn't put out that kind of $ and possibly be stuck with a bunch of blanks I can't sell. 15' rods aren't all that popular here.....yet. There's someone from OH that's selling CTS float blanks, but it's not the one I want to try. I did build a bass rod for a customer on a CTS and I have 3 more to build (personal stock). One of them is a one-of-a-kind prototype.
|
Loomis
Pro Angler
- Total Posts : 2674
- Reward points: 0
- Joined: 2005/09/19 09:18:47
- Status: offline
RE: St. Croix float blanks.
2010/02/25 14:17:28
(permalink)
Hear that about the buy in, gets annoying. If u had one built I was gonna ask you if I could fish it haha. maybe in the future, cant shell out that kinda jack either for something im not gonna like.
|
Trout About
Pro Angler
- Total Posts : 1048
- Reward points: 0
- Joined: 2001/11/24 21:32:27
- Location: West Newton, PA
- Status: offline
RE: St. Croix float blanks.
2010/02/25 14:31:43
(permalink)
If I'm ever in JC's neighborhood, I'd stop in and cop a feel. If I like, I'd buy one then.
|