Clint S
Pro Angler
- Total Posts : 3706
- Reward points: 0
- Joined: 2011/04/17 20:18:35
- Status: offline
1/7/12
Headed up report to follow
|
Clint S
Pro Angler
- Total Posts : 3706
- Reward points: 0
- Joined: 2011/04/17 20:18:35
- Status: offline
Here is the report. Started out up North. Got there water was looking good. Decided that I was going to float fish today so getting the set up right took a bit of time. Started with pink worms on a small pink marabou jig head. After a few casts, yeeeeeehaw bobber down, fought for a minute and it broke off. Tied another jig on with a worm a few casts later another bobber drop and break off. I was running 6lb Drennan tippet so I said enough is enough. Switched to 10lb and not a taker. Tried some beads and nymphs on the 10lb nothing. Went back to the 6lb and 1 more take on a wacky rigged worm, no break off this time just came off. 3 hours there and for 2 of them my buddy and I had the stretch to ourselves. Decided to get warm and head back down to the zoo after a bite at the BK lounge. Hit the wires a for 1.5 hours and not a taker in sight by us or anyone around takled to 2 drift boats and they said the same, rough going. Headed to the LFZ and broke out the fly pole 1.5 hours there and rolled 2 on some stoneflies. Only saw a few other takers by other folks other than this Lady fishing on the rocks at the church pool 6 takers in in the 1.5 hours we were there and 3 landed. She was using a small red bead headed black bodied nymphs like a #10. Looked a little like this one http://www.yankeeangler.com/Toms60SecondRedHead.html She was C and Ding with alot of weight, but all hooks looked good. Funny thing was her husband was a few feet down using the same thing and he was getting nothing. She was at the right place at the right time. Nice folks,even said I could fish off her spot as she walked the fish downstream and chased it . Overall 0/5 and a good day.
|
Clint S
Pro Angler
- Total Posts : 3706
- Reward points: 0
- Joined: 2011/04/17 20:18:35
- Status: offline
Here are my questions of the day. My break offs. Does Flouro get more brittle in the cold. I did not have an issue all fall with the 5lb test on some bigger fish. Question 2. I do not have a good float pole so I was using an 8.5 foot pole I had around. I was having alot of issues with the mono being pulled ahead of the float and pulling on the float, especially with the longer casts. I am guessing this is where the long 10 foot noodle rods come in to try to keep the line off the water. Is this the case or am I doing something wrong? The bobber itself, I got a few that came with the rubber tubing, slide the line through the bobber and the how do you use the tubing to stop it from sliding. I just kind of doubled the line over the bottom of the bobber and slipped the tube over. It held until a snag and pulled out making the bobber slide. Is this theright set up?? Overall I had a good experience with the float once I got the shot figured out.
|
dimebrite
Pro Angler
- Total Posts : 3207
- Reward points: 0
- Status: offline
Nice report... its always nice when you hit it just right up there... If I were you I wouldn't have left
|
Clint S
Pro Angler
- Total Posts : 3706
- Reward points: 0
- Joined: 2011/04/17 20:18:35
- Status: offline
All the hits came early and it had shut down a bit. I was also fishing with my buddy that has diabetes so feet and legs get cold faster than normal, plus our stomachs were growling. :0P
|
draketrutta
Pro Angler
- Total Posts : 1577
- Reward points: 0
- Joined: 2009/09/22 16:24:33
- Status: offline
Drennan is very good cold water line. You need a better shock absorber = longer rod... I caught two pukey little browns today in Pennsyltucky - lazy man method - chuckin spinners from shore. Nice January Thaw Weather - considering there was nothing to thaw out of..
|
Clint S
Pro Angler
- Total Posts : 3706
- Reward points: 0
- Joined: 2011/04/17 20:18:35
- Status: offline
Figured out the bobber thing. Line through 2 pieces of tubing and outside of the float. Tubing on float
|
pafisher
Pro Angler
- Total Posts : 3000
- Reward points: 0
- Joined: 2002/08/15 11:14:30
- Status: offline
The line on the water is due to the short rod,get a 11' rod rated for lighter line to prevent broken tippits and to keep line off water.
|
draketrutta
Pro Angler
- Total Posts : 1577
- Reward points: 0
- Joined: 2009/09/22 16:24:33
- Status: offline
ORIGINAL: Clint S Figured out the bobber thing. Â Line through 2 pieces of tubing and outside of the float. Tubing on float Iv'e seen some guys use 3 pcs of tubing - 1 on top, 2 on bottom of float. They are the ones that swing for the fences during hookset... **************** Clint - here is a link explaining various ways to set up the shot patterns for various water conditions. Not sure if you ever came across this on Al Gore's intrawebs, but it is pretty good illustration IMO.. SHOTTING PATTERNS later
|
Clint S
Pro Angler
- Total Posts : 3706
- Reward points: 0
- Joined: 2011/04/17 20:18:35
- Status: offline
Thanks for the info guys. I kind of figured my pole was too short, but ya use what ya got. A longer pole will be in the future. Drake thanks for the link it is bookmarked. I knew the basic info on shot placement, but now have an even better idea and need to make some refinements. I like the idea of floating in the colder winter months and I can cover more water and get more casts per hour with the spin rod. I don't want to limit myself to one particular way, just want to catch some fish.
|
dimebrite
Pro Angler
- Total Posts : 3207
- Reward points: 0
- Status: offline
Clint I heard you mention something about putting the line through the float.... they do make floats that allow to do this. They are called slip floats. They allow you to fish very deep water without keeping a long leader beneath your float when casting. They are to be used with a special little stopper that is set at your desired depth on your line. They can be used in shallow water also, but the stopper is still necessary. Shot rigging is very important and for the most part you do want to keep your line off the water. When drifting keep a little tension on the line rather than just free spooling it out. This will make your float slightly point upstream. This can be accomplished by subtle pull back on the rod while putting your finger on the spool to not allow it to completely free spool. I've recently thought about putting my reel in reverse mode while drifting so I can control my line feed/speed better. I would just have to flip the lever when a fish takes... good luck
|
chosenfrozen1
Novice Angler
- Total Posts : 99
- Reward points: 0
- Joined: 2011/12/16 18:26:43
- Location: ulster county
- Status: offline
|
Clint S
Pro Angler
- Total Posts : 3706
- Reward points: 0
- Joined: 2011/04/17 20:18:35
- Status: offline
Chosen thanks, my bookmarks list is getting long.
|
fichy
Pro Angler
- Total Posts : 1899
- Reward points: 0
- Joined: 2011/06/15 16:12:51
- Status: offline
Nice report Clint. Floats have a definate advantage over flyfishing in alot of cases, I may look into using it occasionally, so handy info. I went yesterday, too. I went 4 for 10 or so below the LFZ in the morning (All on sz. 8 and 10 nymphs) , and only had a few misses below Pineville in the afternoon. Going sleepless had something to do with that probably. Seems they are finally starting to go into the small fly/winter mode. I helped a fellow land a nice fish he got fishing a sz. 14 green caddis larvae pattern on a spinning rod. They were hitting it hard all day for him. Sorry to piggyback a report onto yours, just not worth a separate thread for the same old **** of mine. If I don't have to plow, I'll go back next weekend for a day. Good luck to everyone.
|
chosenfrozen1
Novice Angler
- Total Posts : 99
- Reward points: 0
- Joined: 2011/12/16 18:26:43
- Location: ulster county
- Status: offline
nice s0s 4for 10 your killing me! i sat in my chair all day without a hit.i'm starting to withdraw have to make the trip soon.
|