Rod Tip Repair

Author
Post
Essentials Only Full Version
bcain
Expert Angler
  • Total Posts : 378
  • Reward points: 0
  • Joined: 2012/05/09 21:56:08
  • Location: Smithton
  • Status: offline
2014/04/18 23:36:30 (permalink)

Rod Tip Repair

Question. What's the best stuff to use to fix a rod tip? I bought one of those Berkley or Fuji (cant remember) rod tip kits and it seems like the rod tip could easily be pulled off. I have a new rod that was bought with a tip missing the insert in the guide. I'd like to fix it.
#1

5 Replies Related Threads
    FishinGuy
    Pro Angler
    • Total Posts : 2093
    • Reward points: 0
    • Joined: 2007/05/16 12:41:21
    • Location: westmoreland county
    • Status: offline
    Re: Rod Tip Repair 2014/04/19 07:44:24 (permalink)
    The last kit I bought came with a hot glue stick. I threw that away and used 5 minute epoxy and haven't had an issue.
    #2
    Trout About
    Pro Angler
    • Total Posts : 1048
    • Reward points: 0
    • Joined: 2001/11/24 21:32:27
    • Location: West Newton, PA
    • Status: offline
    Re: Rod Tip Repair 2014/04/19 09:25:53 (permalink)
    I stock a variety of tips.  If you want to get a proper sized one (those kits are always oversized), shoot me a message.
    #3
    bcain
    Expert Angler
    • Total Posts : 378
    • Reward points: 0
    • Joined: 2012/05/09 21:56:08
    • Location: Smithton
    • Status: offline
    Re: Rod Tip Repair 2014/04/20 00:44:53 (permalink)
    I definitely will give you a holler Trout About. I am just in Smithton so as soon as I get the time to mess with it, I will message you. I have repaired the tip on an ultralight of mine with a store bought kit and it was a little too big. Its only a $50 rod but it is brand new. It is just missing the insert so its not like any thing is broken.
    #4
    Trout About
    Pro Angler
    • Total Posts : 1048
    • Reward points: 0
    • Joined: 2001/11/24 21:32:27
    • Location: West Newton, PA
    • Status: offline
    Re: Rod Tip Repair 2014/04/22 20:57:54 (permalink)
    coldfront
     is there a safe way to loosen it and bring it back in line?



     
    Slowly and carefully heat it with a lighter..... CAREFULLY, or you'll end up melting the tip under it. Actually, hold the lighter so the flame is a few inches below the tip.  It'll take a bit of time, but it should melt the glue and allow you to realign it.  Some are real stubborn tho.  A lot of tip replacements I've done, I had to cut the tube off with a dremel.
    #5
    Cold
    Pro Angler
    • Total Posts : 7358
    • Reward points: 0
    • Status: offline
    Re: Rod Tip Repair 2014/05/18 17:31:56 (permalink)
    Just noticed that one of my fly rod tips was waaaaay cattywompus when I put it together last week...like over 45 degrees off of the line the rest of the guides follow...I'll have to try the "heat it & beat it" approach. 
    #6
    Jump to: