How to Install Custom Marine Aluminum Fuel Tanks?

Author
Brandon Hefner
New Angler
  • Total Posts : 6
  • Reward points: 0
  • Joined: 2018/08/24 03:27:39
  • Location: 16 Butler Boulevard Bayville, NJ 08721
  • Status: offline
Flagged as Spam (2)
2018/11/19 01:14:52 (permalink)

How to Install Custom Marine Aluminum Fuel Tanks?

If you had a long hold on your boat and want to rebuild it, there are few things that needs complete expertise. Doing an aluminum boat restoration and installing a custom aluminum tank into it can be a painful task. This article is to shed the light on some most important factors related to custom marine tanks, aluminum tanks and which tank would be appropriate for a long lasting period.
 
You will also have your answer of how to install Aluminum Fuel Tanks. Remember that there are different types of tanks available like aluminum gas tanks, aluminum diesel tanks, mako gas tanks, angler gas tanks etc. They may have altered processes of installation.

How to get a custom aluminum fuel tank?

For marine tanks, boats, yachts, or any vehicle that runs in water, aluminum considered as the best metal to use.  Before purchasing a custom made aluminum fuel tank make sure it has these qualities –
 
1 – If you’re in US, the aluminum tank should meet the U.S Coast Guard specifications.
2 – The repairer should be well-aware of Federal regulations (CFR 183.501-183-590).
3 – Be prepared to inspect the tank for any leakage or hole.
4 – The custom made tank should meet all EPA, ABYC and USCG standards.
5 – Check the quality of boat aluminum tank to ensure safety.
6 – Most of the companies who sell fuel tanks have services of providing experienced technicians for installation. It saves you from any botheration.
 
There are many companies available in U.S providing quality services with many convenient schemes as well. They fabricate the tanks according to your choice and compatibility with materials you prefer.

Which material is best for custom tank?

There are plenty of materials and alloys used to manufacture custom tanks. Usually companies use polyethylene (plastic), aluminum, fiberglass, and stainless steel to make marine fuel tanks. It depends on tank type that which material is to use. But for Boat Gas Tanks, there are majorly two choices available polyethylene and aluminum. Both materials have different pros and cons with them.
 
Plastic marines are cost effective as compared to aluminum but their downside is that they don't have baffles inside the tank to limit the swashing of fuel. On the other side, aluminum tanks have baffles benefits with them.

How to Install Aluminum Fuel Tank?

Any type of tanks whether it is aluminum fuel tanks, aluminum gas tanks, Bertram gas tanks or Angler Gas Tanks, they comes with an expiry date. Replacing your old tank is a good decision. Most of the tanks last more than 15 years but in case aluminum fuel tank didn’t install properly they might fail to survive for long. The process of installation is too long that you can explore with this link https://bit.ly/2qHp42M.
 
Note: - Instead of replacing the whole tank it’s better to check if one of its components damaged or is there any corrode occurring.

Attached Image(s)

#1

0 Replies Related Threads

    Jump to: