Pa checking 20 hp motors

Page: < 12345 Showing page 5 of 5
Author
**commander**
Pro Angler
  • Total Posts : 4216
  • Reward points: 0
  • Status: offline
RE: Pa checking 20 hp motors 2011/06/23 20:46:13 (permalink)
dont blame you. just sayin'

"I'm sick of all the fairytale stories of how this is destiny and how the saints have rebuilt new orleans.Sorry but you can write the script anyway you want but the actors(sean payton and crew)do not have the talent to step on the stage."---Logan Wade
beeverfishing
Novice Angler
  • Total Posts : 75
  • Reward points: 0
  • Joined: 2007/04/15 17:48:52
  • Location: Franklin, pa
  • Status: offline
RE: Pa checking 20 hp motors 2011/06/23 23:42:30 (permalink)
ORIGINAL: frost

I honestly wish they would check at the tourneys.  I have a 15hp kicker on my flat bottom aluminum bass boat and when a vee bottom with a 9.9, 15, 18, or 20hp fly past me like I'm sitting still it kinda gets the blood boiling.  I know my boat weights a little with the decking and the big motor, however there is no way a true 9.9 or even a 15 should blow past me and get the vee bottom up on plane. 

A law is a law and should be enforced.  I know people break laws, even knowing there are consequences, but they need to be enforced like traffic laws.  


As was already posted..
I also have a 14' "shallow V" hull with a 15 hp Yamaha. I have a 7' casting deck made from 3/4 plywood and 2x4's .. deep cycle battery, and 6 gallon fuel tank.. On a calm day I get get close to 23 MPH.. (GPS speed)...With my gf aboard I can do around 17 MPH.. Yes, my boat will get up on plane with out a problem.. But normally you will see me at idle..1 to 1.8 MPH depending on the wind / waves..
treesparrow
Expert Angler
  • Total Posts : 651
  • Reward points: 0
  • Joined: 2005/02/21 09:27:15
  • Status: offline
RE: Pa checking 20 hp motors 2011/06/24 03:05:27 (permalink)
When they came out with the 20hp limit I traveled clear to Mass. to buy a 20hp Merc 2 stroke which is an 87 motor.
I allways did want more power on my 14' v bottom. I fish Georgian Bay in Ontario and it sure is nice to have the extra power.
3006savage
Novice Angler
  • Total Posts : 55
  • Reward points: 0
  • Joined: 2009/04/30 16:32:13
  • Status: offline
RE: Pa checking 20 hp motors 2011/06/29 12:10:52 (permalink)
I was out at Pymy last weekend and the fish commision was there for approx 2 hours but did not check any motors.

They did check some livewells. My motor is a 28 hp with 20 stickers and he and I talked for approx 5 minutes while I secured my boat. He never even looked at my motor. They were acutally there both days and never checked any motors either day.

I always just cruise at approx 15 MPH so I dont draw any attention and they have never bothered me.

Most of the Johnson Evinrude engines are just about impossible to figure out. The engines are identical from 20 - 35 hp except for the carb. They would have to measure the throat of the carb to tell for sure. The mercs however are 3 cylinder above 20hp and the Fish Commission does know that and will bust you.
anzomcik
Expert Angler
  • Total Posts : 721
  • Reward points: 0
  • Joined: 2007/07/31 05:16:41
  • Status: offline
RE: Pa checking 20 hp motors 2011/06/29 12:32:56 (permalink)
ORIGINAL: 3006savage

The mercs however are 3 cylinder above 20hp and the Fish Commission does know that and will bust you.



Incorrect, I own a mercury 25 hp and it is a 2 cylinder. In fact merc made 2 cylinder motors in 35hp 40hp and 60hp. In fact the 60hps are not terribly bigger than the 25hp.

Where merc motrs really get confusing is they made a 2cylinder 40hp and 3 cylinder 40hp and a 4 cylinder 40hp.
post edited by anzomcik - 2011/06/29 12:40:47
3006savage
Novice Angler
  • Total Posts : 55
  • Reward points: 0
  • Joined: 2009/04/30 16:32:13
  • Status: offline
RE: Pa checking 20 hp motors 2011/06/29 14:11:21 (permalink)

ORIGINAL: anzomcik

ORIGINAL: 3006savage

The mercs however are 3 cylinder above 20hp and the Fish Commission does know that and will bust you.



Incorrect, I own a mercury 25 hp and it is a 2 cylinder. In fact merc made 2 cylinder motors in 35hp 40hp and 60hp. In fact the 60hps are not terribly bigger than the 25hp.

Where merc motrs really get confusing is they made a 2cylinder 40hp and 3 cylinder 40hp and a 4 cylinder 40hp.


Yes I see that is correct. I guess what I am trying to point out is that the Fish Commission knows to look at the Merc motors stickered at 20 hp and if it is 3 cylinders they know it is a fake.
anzomcik
Expert Angler
  • Total Posts : 721
  • Reward points: 0
  • Joined: 2007/07/31 05:16:41
  • Status: offline
RE: Pa checking 20 hp motors 2011/06/29 14:54:20 (permalink)
I agree, a 3 cylinder motor is definatly not 20hp and under. That would be a very fast reference for checking, alot faster than running serial numbers...

I would not like to be an officer who would get assigned to run serial numbers, because some people may have bought what they thought was a 20hp but was really a 25 and they get stung for somthing they thought was legal
Page: < 12345 Showing page 5 of 5
Jump to: