Shimano Curado 300DSV

Shimano Curado 300DSV

View related threads: (in this forum | in all forums)

Logged in as: Guest

Users viewing this topic: none

Printable Version

All Forums >> [General and Speciality Fishing Boards] >> Conventional Fishing & Tackle >> Shimano Curado 300DSV

Page: [1]

Message

<< Older Topic Newer Topic >>

Shimano Curado 300DSV - 9/27/2009 12:28:47 PM

The Tuna

Posts: 52
Joined: 4/2/2009
Status: offline

Recently purchased a 300DSV at Gander Mountain where it was on clearance sale for $120 + tax. I plan to use it on steelhead and saltwater. Anybody own one and have you tried stringing it with braided line ?

Post #: 1

RE: Shimano Curado 300DSV - 9/27/2009 6:46:03 PM

avidangler

Posts: 648
Joined: 11/2/2007
From: armstrong cty.
Status: offline

While i dont own this particular reel i've read alot of reviews on the reel and its a great reel, guys are using them alot for musky. The price you paid was a hell of a deal on it. To spool it with braid put some 8 or 10lb mono on underneath the braid, enough to cover the bottom of the spool. Then attach your braid to it and make sure you put it on tightly so it wont slip. The mono underneath will almost guarantee you wont have any slippage problems.

_____________________________

Born to fish, Forced to work...

Team Iron City
"I didn't get these guns from petting kitty cats, i got them from pumping iron 12ozs. at a time"

(in reply to The Tuna)

Post #: 2

RE: Shimano Curado 300DSV - 9/28/2009 5:39:42 PM

bassrsnappin

Posts: 7
Joined: 7/7/2008
Status: offline

I just bought one for musky, I paid 250 for mine. You got a heck of a deal !
I have 6 of the 200 series curados for bass fishing. I've even been using the 200 series for musky, with 80 lb power pro braid. I've never had ANY problems with curados, I can't say the same thing about other brands I've owned.

(in reply to avidangler)

Post #: 3

RE: Shimano Curado 300DSV - 10/2/2009 9:12:01 AM

The Tuna

Posts: 52
Joined: 4/2/2009
Status: offline

One of the guys PM'd me and told me to avoid braided line, that it tangles too easily and it's dang near impossible to untangle. Basically, one birdsnest and throw the line away. So far I've heeded his advice and have used only Sufix hi-vis yellow 20-lb mono. A birdsnest with that stuff is easy to untangle. Once you learn to adjust the spool control on the RH side of the reel you can completely avoid birdsnests altogether. You place your thumb on the spool after you press the spool release down just to keep the spool from unwinding prior to your cast. Once you cast there's no need to hold your thumb down at all. I'm able to chuck it 110 ft with a 35 gram float from an 11'4" steelhead rod and have actally measured that distance. I also have tried it with the same setup using my 6 1/2' bass pole (Berkley Power Pole) and have sent it 95-100 ft. 30-40 yards is very satisfactory distance for me. I figure braided line might buy me an extra 5-10 yards but is it worth the risk? On one of the websites where they do product reviews (maybe this website) I read a review on the Curado 300DSV where one guy wrote that once you understand the spool adjustment and adjust it accordingly you couldn't create a birdsnest with this reel if you tried. Even though I've not had this reel on the water yet and have only experimented with it in the back yard I have to say that's a true statement. Anyway I liked the reel so much that I went and bought one of 2 remaining 300DSV's at Gander. I plan to take the 2nd one to Florida and leave it there. One of the Shimano websites boasts that this reel is designed just as much for saltwater as fresh. The only negative thing I've read about this reel which as I understand is the largest of all the low-profile baitcasters is that when bringing a fish up from deepwater it does not have the cranking power that some of the round baitcasters have. So if one were planning to use this for deep sea fishing in 70 feet of water, there are probably better choices. But for catching steelhead, salmon, muskie and most saltwater species from anywhere near the surface there's no better low-profile baitcaster.

< Message edited by The Tuna -- 10/2/2009 9:17:46 AM >

(in reply to bassrsnappin)

Post #: 4

RE: Shimano Curado 300DSV - 10/2/2009 11:29:42 AM

jah1317

Posts: 18
Joined: 9/29/2009
Status: offline

If you learn how to use the reel and thumb the spool to prevent back lash you will be fine. As far as not using braided line if you want to follow his advice thats your decision but I have been using it for many years and it's just like mono if you get a back lash you pick it out. Sounds like one bad experience and he gave up. A little patience, a pair of foreceps or a hook and pick and you are good to go. There are too many positive properties to not use it. Feel, low streach= better hook sets, abraision resistance, and 17lb diameter is 65# strength need I say more! Mono does have it's place but this is not it.

Jacob

(in reply to The Tuna)

Post #: 5

RE: Shimano Curado 300DSV - 10/2/2009 12:21:40 PM

The Tuna

Posts: 52
Joined: 4/2/2009
Status: offline

Are you saying I should use the 17lb dia (65#) strength? Certainly the bigger the dia the easier it is to untangle.

(in reply to jah1317)

Post #: 6

RE: Shimano Curado 300DSV - 10/5/2009 10:11:01 AM

jah1317

Posts: 18
Joined: 9/29/2009
Status: offline

It depends on what you are fishing for what pound test you use, the main thing is to practice with the reel so that you prevent the back lash's from happening in the first place. You will always have them but you can keep them to a minimum by setting your tension correctly, thumbing the spool, letting the rod "load" with the weight of your lure instead of snap casting, and practicing. If you have enough of a yard or some other place to do it in, get a screw eye from the hardware store and a stick to the approximate size and weight of a lure stick the screw eye in and cast cast cast. You will look like an idiot to your neighbors but your casting will be improved and you will be able to place the lure where you need to when on the water. Also, my mistake, the 65# test is 15lb diameter not 17lb diameter.

Good luck,

Jacob

(in reply to The Tuna)

Post #: 7

RE: Shimano Curado 300DSV - 10/7/2009 11:25:20 PM

AK22

Posts: 17
Joined: 6/19/2009
Status: offline

The biggest mistake that people make with braided line is cranking the drag down tight because the line is rated heavier. If the drag is too tight the line will dig into itself and when you cast you will get a huge birdsnest.

(in reply to jah1317)

Post #: 8

RE: Shimano Curado 300DSV - 10/9/2009 6:00:47 AM

anzomcik

Posts: 129
Joined: 7/31/2007
Status: offline

I have 2 300s i use with either 65 or 80lb braid. In a night of muskie fishing i may do 300-400 casts with maybe 1 or 2 backlash. With the heavy braid it is never bad, sure the line may dig in but a firm pull of the line it come out and usually it has only one "loop" in the spool grab it and pull bird nest free and your fishing. I will not lie when i get them not more than 5 secounds it takes to correct the issue. Pop the side plate off set three of the six pins brakes and you will have a casting machine with just minor fine tune of the external knob.

side note my reels do not like to get wet, in moderate rain you do need to thumb the reels more they like to "run" when they get soaked.

(in reply to AK22)

Post #: 9

RE: Shimano Curado 300DSV - 11/4/2009 3:21:52 PM

The Tuna

Posts: 52
Joined: 4/2/2009
Status: offline

Maybe I'll give the braided line a try. I've been in Connecticut on business the last month or so and have ventured out onto the beach on Long Island Sound and caught me a 30" Bluefish and 3 large Tautogs (locals call them Blackfish) using the 20lb mono I described. No breaks, only one minor snag. The bluefish I caught using a steel leader, obviously. What a thrill it was catching that blue on the 300 DSV with a mooching rod. Never saw a fish move from L to R so fast. Released the blue, kept the Togs

(in reply to anzomcik)

Post #: 10

RE: Shimano Curado 300DSV - 11/9/2009 6:22:36 PM

fishenfool46

Posts: 802
Joined: 8/13/2003
From: butler pa
Status: online

i read of and issue with braid line that it has cut into the spool itself? is this true but to me in my opinion it jsut doesn't warrent the cost of the line for less stretch.

_____________________________

I didn't say these are the ten suggestions
signed God

(in reply to The Tuna)

Post #: 11

RE: Shimano Curado 300DSV - 11/10/2009 10:03:30 AM

jah1317

Posts: 18
Joined: 9/29/2009
Status: offline

The early lines had a tendency to cut in more so than todays lines. Don't get me wrong, they still do but as stated above, setting your drag correcly pretty much eliminates this. As far as the cost, $200 reel and you want to put one line on it because it's cheaper, does not make a lot of sense to me. The main thing you have to look at is that this line has no memory I.E. you will not have that forms ringlets once it has been on the spool for any length of time. Also, mono will degrade when exposed to sunlight making it over time become brittle and weak, ever tie your knot, test it and it breaks? Thats what the sun does to mono. Lastly, here is a biggy, once your line becomes worn and freyed looking, run out all your line, tie the old end to your backing, reel in and viola! you have fresh line! Yep, you can use it twice now your at under $10/spool just by flipping your line! Really there is no reason not to run braided unless your trolling where you want the strech to help with snags but that seems to be a job for a floro leader then you get good abrasion resistance, strech, and it's all but invisable!

Good luck,

Jacob

(in reply to fishenfool46)

Post #: 12

RE: Shimano Curado 300DSV - 11/10/2009 4:44:18 PM

fishenfool46

Posts: 802
Joined: 8/13/2003
From: butler pa
Status: online

well jacob i guess it is to each his own but like i said to put a line on that will damage the spool just so i have no stretch seems a lil out there.and with mono you can go with a flouro line basicly invisable.And as for braid being easy to untangle and it may be me that line was a total bear.i can use the mono to practice with and if i get a nest i have no problem with ripping it off because i got 1500 yards of line for like 10.00 on sale at bass pro.Now if i was a tournament pro and the line was my bread and butter maybe the cost is worth it.But than i would prob get it for free through some company.

< Message edited by fishenfool46 -- 11/10/2009 4:46:32 PM >

_____________________________

I didn't say these are the ten suggestions
signed God

(in reply to jah1317)

Post #: 13

RE: Shimano Curado 300DSV - 11/11/2009 9:45:18 AM

jah1317

Posts: 18
Joined: 9/29/2009
Status: offline

When I said "cut in" I was not referring to it cutting into the spool it's self, I was talking about the line tightening in between the other wraps on the spool and cinching down. It is just burying into the line on the spool not the spool directly. No cutting of the spool or damage to it, just have to pull some line off the spool and reel it back in under tension. This was more prevelant years ago when the could not make the line round as it is now but was more flat and would bury in easier. Truth be told I have never heard of it damaging the spool, don't know how that could possibly happen...... It did have a tendency to eat line guides but now the vast majority of line guides are ceramic specifically because of superlines. I know of mono eating into the pin on a spincast which is the same thing that would happen with any line, but I still don't see how it could damage the spool itself especially cutting into it. I back my line with 20# mono for 1/4 then top it with braid. The reason being is that braid is coated, and does not get the grip that mono does on the spool so what happens is that the line pulls off despite how well the drag is set. I missed a few walleyes once because of this.... blamed the line, blamed the reel, looked into it and blamed myself. You can also wrap your spool with electrical tape or duct tape and then go with strait braid so that it does not slip but I have never tried that. Once again to each his own, but I know what I will be doing.

Jacob

(in reply to fishenfool46)

Post #: 14

RE: Shimano Curado 300DSV - 11/11/2009 7:28:09 PM

fishenfool46

Posts: 802
Joined: 8/13/2003
From: butler pa
Status: online

thanks for the info jacob i learned a few things i diodn't know before
which is always a good thing.ff46

_____________________________

I didn't say these are the ten suggestions
signed God

(in reply to jah1317)

Post #: 15

Page: [1]

All Forums >> [General and Speciality Fishing Boards] >> Conventional Fishing & Tackle >> Shimano Curado 300DSV

Page: [1]

Jump to:

New Messages	Hot Topic w/ New Messages	Locked w/ New Messages
No New Messages	Hot Topic w/o New Messages	Locked w/o New Messages

0.141