Where to look on outboard to find year of older evinrude

Author
Post
Essentials Only Full Version
eye-c-man
Avid Angler
  • Total Posts : 223
  • Reward points: 0
  • Joined: 2001/02/13 23:27:43
  • Status: offline
2007/08/30 20:32:41 (permalink)

Where to look on outboard to find year of older evinrude

Was wondering if anyone would know where the information plate is located on motor & what the mix ratio would be for the gas?    Thanks in advance
#1

5 Replies Related Threads
    fish12
    Avid Angler
    • Total Posts : 131
    • Reward points: 0
    • Joined: 2004/12/04 22:32:38
    • Status: offline
    RE: Where to look on outboard to find year of older evinrude 2007/08/30 20:47:14 (permalink)
    Check out this site called MarineEngine.com Message board.  (infoatmarineengine.com).  I hope I posted this right.  They will probably tell you all of the information that you need.
    #2
    pghmarty
    Pro Angler
    • Total Posts : 5951
    • Reward points: 0
    • Joined: 2004/12/05 01:02:33
    • Location: Bradford Pa then Pittsburgh
    • Status: offline
    RE: Where to look on outboard to find year of older evinrude 2007/08/30 21:03:42 (permalink)
    http://www.marineengine.com/cgi-bin/discus/discus.cgi
    #3
    Katty
    Avid Angler
    • Total Posts : 169
    • Reward points: 0
    • Joined: 2003/09/23 16:21:31
    • Status: offline
    RE: Where to look on outboard to find year of older evinrude 2007/08/31 09:23:06 (permalink)
    EYE-C-MAN  Look on the power trim (area where the motor is attached to the boat) there will be a serial number there. From there you can do a search for the exact information for that motor. However, my guess would be that the mix is 50:1.
    #4
    eye-c-man
    Avid Angler
    • Total Posts : 223
    • Reward points: 0
    • Joined: 2001/02/13 23:27:43
    • Status: offline
    RE: Where to look on outboard to find year of older evinrude 2007/08/31 09:32:13 (permalink)
    Ok i found the serial #5302A-E01275 . On the cowl it says "fisherman" Its an evinrude 5 1/2 hp with a 6 gallon gas tank . Thats what i think the mix should be. I'll do a little more searching .....Thanks for all the help   Paul
    #5
    Katty
    Avid Angler
    • Total Posts : 169
    • Reward points: 0
    • Joined: 2003/09/23 16:21:31
    • Status: offline
    RE: Where to look on outboard to find year of older evinrude 2007/08/31 10:02:13 (permalink)
    EYE-C-MAN
    Evinrude 5302Year: 1963 HP: 5.5 WOT RPMS: 4000Displacement: 8.84 cu.in. = 144.8 ccCylinders: 2Weight: 56 lbs. = 25.4 KgGear ratio: 15:26Lower unit oil: OMC/BRP 'HiVis' or other brand 80/90W outboard gearcase lube.Fuel/Oil mix: 24:1 91 RON petrol to TC-W3 rated outboard oil (40ml per l). Stop using SAE 30W that may be indicated on the engine.Spark plugs: Champion J6C gapped at .030" (0.75mm). Originally speced J6J is no longer made. Picture From the Old OMC Site The factory service manuals are by far the best. They can be ordered from the following US companies:TheOutboardWizardMastertechMarine EngineKen Cook The Seloc one that Iboats and others sell is pretty good, but the factory ones are much better. Sometimes the factory ones turn up on ebay for a fraction of the price of a reprint but I don't see any right now.Unless it has an extension, it should be a shortshaft motor. To check, you just need to measure
    #6
    Jump to: